705-57-21000 Hydraulic Gear Oil pump For Wheel Loader WA250-3MC
Displacement Shaft End (cu in/revolution): |
2500 |
Minor Diameter [Min: |
2500 psi |
Shaft Dia.: |
0.625 in |
Displacement Cover End (cu in/revolution): |
62A |
Controlled Flow Rate: |
18.0 LB |
Minor Diameter: |
1 1/4 in |
GPM @ 1,800 rpm, Shaft End: |
P |
Shaft End Pressure [Max: |
Flange Mount |
PDF |
|
Product Details
Displacement Shaft End (cu in/revolution) |
2500 |
Minor Diameter [Min |
2500 psi |
Shaft Dia. |
0.625 in |
Displacement Cover End (cu in/revolution) |
62A |
Controlled Flow Rate |
18.0 LB |
Minor Diameter |
1 1/4 in |
GPM @ 1,800 rpm, Shaft End |
P |
Shaft End Pressure [Max |
Flange Mount |
Max. RPM [Max |
Buna-N |
Shaft End Flow @ RPM |
11 gal/min @ 1200 rp |
Pressure Port |
3/4 in NPT |
Flow @ RPM |
11 gpm @ 1200 rpm |
Rotation |
Right Hand (CW) |
Shaft Type |
9 Tooth Splined |
GPM @ 1,800 rpm |
16 1/2 |
Pump Series |
V20 |
GPM @ Speed |
16.5 gpm @ 1800 rpm |
Integral Valve Configuration |
w/o Integral Valves |
Mounting Flange |
SAE A, 2 Bolt |